Product code: MQBSTG3
Revo offers some of the most substantial performance increases on the market, however, only the driven know that peak figures form part of a much bigger picture and are never the sole focus during Revo’s development process; it’s all about the drive. Only Revo offers a perfect balance of performance, economy and engine longevity.
The Revo tuning philosophy ensures that impressive performance benefits are balanced with useable, reliable power delivery that enhances the way your vehicle drives. Development on the road and racetrack as well as testing in controlled dyno conditions gives you a clearer picture of the performance you can expect from Revo ECU Software. Testing in this way plays an important role in ensuring the highest quality products and delivering the driving experience expected.
Combining Revo's expertise in hardware design, development, testing and manufacture with Revo Performance Software the outcome is a complete package to rival anything from an OEM Manufacturer. The IS38 ETR Turbo upgrade is designed to provide a completely reliable solution giving up to 520BHP/580NM on EA888 Gen3 vehicles running on stock engine internals.
Enhancing the vehicle with Revo ECU Software gives you much more than just an increase in power and torque. It feels more responsive and offers a huge improvement throughout the whole rev range, something that only the driven will understand and demand.
Only Revo performance ECU Software maintains factory safety levels and additional driving features. You can also choose between four pre-set fuel quality modes depending on which fuel you use. The Revo SPS Software Switch is also available separately, which can be used to quickly switch between a low boost mode and 3 other performance modes for 97, 98 and 100ron fuel quality.
Performance and Power packages from Revo are designed for those who want the ultimate experience; refined drivability, exhilarating power delivery and crisp response low down and at the red-line. With a full suite of hardware and performance software available, we’ve created a tuning solution unlike any other. With everything you’ll need installed and set up by one of our Authorised Dealers, we’ve taken the guesswork out of tuning.
Designed for the most driven among us, we’ve designed and extensively tested a full package of supporting products required to run the Revo IS38ETR Turbo and performance ECU Software. Utilising the enhancements made by the Performance Pack, the only limitation is your right foot and how hard you’re willing to push it. Perfected for track and refined for the road, only Revo offers big power without a compromise on day-to-day driveability. Our strict tuning ethos offers the perfect balance of performance, driveability and economy, without sacrificing engine longevity.
This package, which is also available individually includes the Revo Carbon Series Air Intake System, Intercooler and Intercooler Pipe Upgrade Kit.
Add to this the Revo IS38ETR Turbo and performance ECU Software and you’ll be enjoying over 500HP and 580NM.
Only Revo operates a Global Development Programme through its network of over 400 Revo Authorised Dealers worldwide. Access to vehicles on this scale enables the calibration team to fine-tune products before release, testing products in a wide range of climates and conditions including altitude, fuel quality, humidity. This also allows Revo to test how Revo products perform in different driving scenarios and formed a vital part in the development of Performance ECU Software.
Initial development for the Revo IS38 ETR package started back in 2016. Since then it has undergone exhaustive testing through the Global Development Programme on multiple cars, covering over 200,000 miles. During this time, Performance ECU Software has been fine-tuned along with required Revo hardware to ensure the final package is the best available. Running 500HP usually requires special consideration, something easy to forget when the Revo package offers such responsive driving. That’s why additional features such as cold and hot oil temperature protection have been added which reduce power and risk to engine components, along with engine oil cooler valve optimisation and turbo heat management.
Dyno testing was carried on our inhouse DynaPack chassis dynamometer, which measures performance at the wheel hubs, for comparisons between a Stock VW Golf R with IS38 Turbo and the same vehicle fitted with a full Revo performance Pack and IS38ETR V1 and V2 turbos.
Performance testing was carried out on a private track in the UK on a 2014 VW Golf R with DSG transmission. Revo Rv019 19" wheels with Nankang road tyres, traction control off and 99RON Shell vPower. The average performance times are taken from 5 consecutive runs.
For our IS38 ETR software upgrade, you will require additional hardware upgrades, below we have listed the required and recommended parts to achieve the maximum performance.
Revo Power Pack:
Revo Performance Pack:
Other Parts
For engine oil to work effectively and lubricate your engine it needs time to warm up. When you first start your car, the cold oil is at its thickest, producing higher oil pressure when pumped around the engine putting extra pressure on oil seals. As the engine temperature increases, so does the oil temperature. This thins the oil, enabling it to run more freely and better lubricate the moving parts of your engine. Cold Start Protection helps protect engine components by limiting turbo boost based on RPM and oil temperature until it reaches the 80ºC optimum operating level.
Revo Temperature Protection is an additional safety feature that reduces overall load as the oil temperature passes a set limit. Exhaust gas temperatures (EGT) are also monitored, adapting the operating conditions (Air Fuel Ratio) to ensure they stay within safe parameters. If EGT's reach a set upper limit, then power is automatically reduced until the engine returns to a safe operating temperature.
Using an SPS switch you can take advantage of the switch-ability of Revo software. The Patented OBD2 interface is the ultimate compliment to Revo performance software, giving you the ability to switch between 3 fuel quality modes and an Anti-Theft mode via the vehicle OBD port.
Simply select a program, plug in, wait a few seconds, remove the SPS device and start the car. It's simple and there's no fixed switch to install in the vehicle.
Notes:
Please contact your local Revo Authorised Dealer for additional information and availability.
© Revo
Join our Newsletter for offers and events
To enquire about having any of our products listed on this website fitted or intalled to your vehicle. Please call our workshop in St Albans, Hertfordshire, UK on: 01727867747. In addition to part fitting we also carry out Servicing, MOTS, Diagnostics & Repairs.
01727867747
8.00am - 6.00pm Monday-Friday
Closed Saturday/Sunday