Front Wishbone Rear Bush Caster Adjust
Product code: PFF76-902G
Description
This is a Car Set (2 Bushes)
Diagram reference 2
PFF76-902G Front Wishbone Rear Bush has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0° of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased by 250% over standard rubber.
OEM Part Number: 48655-52100
OEM Part Number: 48068-52140
Fitting Instructions:
1. Press the original rubber bush including outer
shell from the front arm.
2. Clean any dirt and corrosion from the bore of the
arm, and file off any sharp edges.
3. Push the caster adjustable polyurethane bush
assembly into the bore of the arm from the top, so
the lip sits on top of the arm.
WARNING: Do not press on the centre ball, press on
the metal outer shell only otherwise you may
damage the bush.
5. For maximum caster adjustment, rotate the
centre sleeve with the supplied 27mm spanner so
that the offset bolt hole is nearer to the inside of
the car, as shown in figure 1. This setting is
recommended for maximum steering feel
improvement, but the caster can be adjusted to suit
your preference.
6. Check and rectify all other wheel alignment
parameters, and tension all hardware to
manufacturers recommended torque settings.
Subscribe to SCC
Join our Newsletter for offers and events
Part Fitting Services
To enquire about having any of our products listed on this website fitted or intalled to your vehicle. Please call our workshop in St Albans, Hertfordshire, UK on: 01727867747. In addition to part fitting we also carry out Servicing, MOTS, Diagnostics & Repairs.
Important Info
Contact SCC
01727867747
8.00am - 6.00pm Monday-Friday
Closed Saturday/Sunday