Control Arm Lower Complete Alloy Assembly - DuroBall
ALOY0018K Control Arm Lower Complete Alloy Assembly - DuroBall
These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees.
These enhancements are the optimal settings over standard to produce a better handling vehicle.
SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.
The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.
The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more
Kit Includes: 2 x Arms
Wheel-alignment required after fitment
WHY CHOOSE SUPERPRO?
SuperPro has the largest range of aftermarket polyurethane bushes available and are currently manufacturing nearly 7000 products at their own facility in Brisbane, Australia.
The benefits of using aftermarket components is that each product is designed from the ground up to exceed standards as a standalone component, rather than as a subordinate component of a larger module (as seen in OE engineering). SuperPro embraces the concept of developing a higher quality, quieter, longer lasting alternative to standard rubber bushings.
All SuperPro products:
are made from SuperPro's own proprietary special elastomer-based engineering-grade polyurethane formula
exhibit the best characteristics of both rubber and plastic materials due to their unique formulation
are a superior alternative to rubber; providing higher-quality quieter, longer lasting bushings with no increase in NVH (Noise, Vibration and Harshness)
have superior abrasion resistance to rubber
have excellent memory properties
are unaffected by extreme temperatures, oils and coolant
are not constrained by OE design constraints (mass-production costs, warranty and vehicle assembly factors)
Join our Newsletter for offers and events
To enquire about having any of our products listed on this website fitted or intalled to your vehicle. Please call our workshop in St Albans, Hertfordshire, UK on: 01727867747. In addition to part fitting we also carry out Servicing, MOTS, Diagnostics & Repairs.