Product code: PFF19-2230
PFF19-2230 Upper Gearbox Mount Insert is made from our Yellow 70A material and works by stiffening the OEM mount reducing the amount of engine/trans roll during hard acceleration and gear changing for a more responsive feel. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 2108080 / K1BY-7M121-AB
Bushes per Car 1
Diagram reference 30
Fitting Instructions:
1. Support the gearbox from underneath using a
trolley jack or axle stand.
2. Remove the gearbox mount from the vehicle.
3. Separate the top and bottom bracket by
prising the two parts apart.
4. Fit Insert A towards the front of the car and
Insert B part towards the rear of the car as shown
in figure 1. The inserts are marked for
identification.
5. Refit the top bracket back over the gearbox
mount, as shown in figure 2.
6. Re-fit the fully assembled mount back to the
vehicle and tension all hardware to the
manufacturers recommended torque settings
Join our Newsletter for offers and events
To enquire about having any of our products listed on this website fitted or intalled to your vehicle. Please call our workshop in St Albans, Hertfordshire, UK on: 01727867747. In addition to part fitting we also carry out Servicing, MOTS, Diagnostics & Repairs.
01727867747
8.00am - 6.00pm Monday-Friday
Closed Saturday/Sunday